Re: Yet Another Winch 2011
Posted: Thu Mar 31, 2011 5:13 amJohn why not video or take pictures of you new winch and couple it with a set of plans/dimmensions and sell that? its a fine looking winch and from the posts ive read, it ought to sell.
Gold Dredger dot Com Disscussion Forums
Internet Gold Prospecting
http://golddredger.com/forum/
Yet Another Winch 2011
Page 3 of 4
Posted: Thu Mar 31, 2011 5:13 amRe: Yet Another Winch 2011
Posted: Thu Mar 31, 2011 6:59 amJohn necessity is the mother of invention and bud you are indeed inventive and will greatly miss your posts,exploits and info-nuttn' but respect and tons a au 2 u 2-John
Innards of a Boulder Winch
Posted: Sun Apr 17, 2011 10:29 amI thought I would share a picture of what I have completed thus far. The drive train- Gearbox, middle engagement shaft with dog, and the spool all contained within 20". The total gear ratio on this one works out to 864:1.
Went a little torqier so I could use a smaller engine 2.5 HP. This next winch will be smaller and considerably lighter. Took me a few month to get to this point but plenty of time and a heap of projects to keep me busy.
Hope everyone/all are voicing the recommendation that the CDFG toss out those there proposed regulations and leave in place the 1994 based regs as they were so I can get the chance to try this new winch out.
Went a little torqier so I could use a smaller engine 2.5 HP. This next winch will be smaller and considerably lighter. Took me a few month to get to this point but plenty of time and a heap of projects to keep me busy.
Hope everyone/all are voicing the recommendation that the CDFG toss out those there proposed regulations and leave in place the 1994 based regs as they were so I can get the chance to try this new winch out.
Re: Yet Another Winch 2011
Posted: Sun Apr 17, 2011 12:49 pmheck John that winch is toooooooo purdy to not use!!
Re: Yet Another Winch 2011
Posted: Sat May 28, 2011 8:45 pmBeen a working on the winch a little here and there, weather permiting, sure is cold today. I don't care what anyone says, I will finish it and very well intend to use it.
Got the thin wall tubing down pat but still don't like using .035 wire very easy to burn through have to keep it moving at least with the heat turned up as I like it. Wish I had some .030 or better yet .025.
Not bad looking welds for NR211, might I say, and strength is even better. They have to be for a winch.
Got the thin wall tubing down pat but still don't like using .035 wire very easy to burn through have to keep it moving at least with the heat turned up as I like it. Wish I had some .030 or better yet .025.
Not bad looking welds for NR211, might I say, and strength is even better. They have to be for a winch.
Re: Yet Another Winch 2011
Posted: Sun May 29, 2011 4:10 amlooking super John!
Re: Yet Another Winch 2011
Posted: Sun May 29, 2011 7:29 amLooking good J, strong and light and hope it moves mountains and helps ya find pounds of oro puro!!! respect-John
Re: Yet Another Winch 2011
Posted: Tue May 31, 2011 5:11 pmI am sure if Hoser wrote a book, it would be a best seller for sure. One thing I love about John is his no-holds-barred honesty. Really, there are a lot of us who would love to read of Hoser's exploits...
Tons a au 2 u john.
Tons a au 2 u john.
Re: Yet Another Winch 2011
Posted: Tue May 31, 2011 10:52 pmThe Tongue 
(in the works)
Finish in 12 Days, probably not. Its perfectly alright I have one awaiting me in Anchorage.
It is keeping me occupied while I wait at least.
(in the works) Finish in 12 Days, probably not. Its perfectly alright I have one awaiting me in Anchorage.
It is keeping me occupied while I wait at least.
Re: Yet Another Winch 2011
Posted: Wed Jun 01, 2011 6:49 am
GOLD FEVER UP TO 103+ AND RISING--SAY 10 DAYS???jOHN 