Wanted P90 Water Pump Seal Kit

[DJR]

I need a "
P90 Water Pump Seal Kit" anyone have one for sale?

[rivraton]

Try here:
http://www.mcmaster.com/#pump-seals/=gclcgz

[Gold Seeker]

You can get anything you need for your pump from Armadillo Mining Shop, there seems to be a problem with the webpage that has all the pump parts, but a call to them will get you what you need if you can't find it anywhere else.

http://armadillomining.com/cgi-bin/imca ... cgi?cat=41

They have a contact link at the top pf all pages.

Skip

[russau]

yep i also found that these seals can be bought cheaper at industrial supply houses online or just bring your pump/seal to a hydrolic repair shop or a pump repair shop. or just get online with Keene,Proline or Armadillo mining supply. i keep spaire seals for my pumps and the tools to replace them in my trailer just incase.

[DJR]

yep i also found that these seals can be bought cheaper at industrial supply houses online or just bring your pump/seal to a hydrolic repair shop or a pump repair shop. or just get online with Keene,Proline or Armadillo mining supply. i keep spaire seals for my pumps and the tools to replace them in my trailer just incase.

Is there a way to figure out what I need to get them online, without taking the pump apart. I just want a spare and money is very tight right now.
Thanks for any help

[russau]

yep moneys tight for me all the time. you need the seal specs. and without takeing it apart and measureing it, i dont know how you could identify what seal you have.and if i didnt buy from a dealer, i couldnt call them and ask for their help identifing what seal i would need. but i dont think that seal is expensive at all.atleast back when i bought mine from Armidillio years back.

[DJR]

Thank you sir.
I appreciate the help.

[rivraton]

Is this P90 on a 2 stroke or 4 stroke?
If it is on a a 4 stroke eng. John Crane P/N JC-601/WPS2 should fit...(Shaft Seal Type 304, Industry #601, .750" Shaft, 1.575" Seal OD)
If it is on a 2 strole eng. I can't help you...

[Hoser John]

KING BEARINGS IS STOCKING THEM ALL

[DJR]

Is this P90 on a 2 stroke or 4 stroke?
If it is on a a 4 stroke eng. John Crane P/N JC-601/WPS2 should fit...(Shaft Seal Type 304, Industry #601, .750" Shaft, 1.575" Seal OD)
If it is on a 2 strole eng. I can't help you...

It's the four stroke that came from Keene. Thanks for the help