Too Old To Dredge?

Any information related to prospecting

Moderators: russau, Leonard

Re: Too Old To Dredge?

Postby libertydave » Mon Mar 10, 2014 10:59 am

Here in Washington State were are having a lot of rain and for last six weeks...and today some of the major rivers around here are going into flood stage. This last weekend I drove up I-90 to the Raging River about fifteen miles east of Seattle and into the foothills and I have not seen this river flow as fast and full for over a decade. Other rivers are the same up in the North Cascade Mountains. Bet this summer should be fun. Leonard and others, you are always welcome up here.

LD
libertydave
 
Posts: 284
Joined: Thu Feb 18, 2010 11:09 am

Re: Too Old To Dredge?

Postby russau » Mon Mar 10, 2014 3:13 pm

Thankyou Dave! Something to consider!
russau
 
Posts: 5924
Joined: Wed Jan 27, 2010 6:17 am
Location: St. Louis Missouri

Re: Too Old To Dredge?

Postby russau » Tue Mar 11, 2014 4:09 am

Well its going to hit 80 today in St.Louis and i want to go tryout my little 2 inch dredge today BUT ive been looking for some 2, 1 1/2, 1 1/4 clear suction hose for my nozzel and the foot valve only tobe shocked by the cost of this material.i dont want to buy the cheap, stiff(like me??:), hard to work hose,so i guess ill keep looking. theres got to be a supplier in or close to St.Louis that has or can get this good hose.ive been doing a google search looking,but most want to seel a roll and i dont need or want that! maybe ill try craigs list for some used hose.......................
russau
 
Posts: 5924
Joined: Wed Jan 27, 2010 6:17 am
Location: St. Louis Missouri

Re: Too Old To Dredge?

Postby Hoser John » Tue Mar 11, 2014 6:18 am

Agriculture suppliers,industrial hose suppliers,septic pumpers all use/sell the kanaflex ,yellow pages rock-lots a luck Russau-John
Hoser John
 
Posts: 3000
Joined: Wed Jan 27, 2010 6:42 am
Location: Redding Kalif

Re: Too Old To Dredge?

Postby russau » Tue Mar 11, 2014 12:17 pm

almost every hose ive seen is yellow/green/black/ or red. trying to find the clear hose. nothing on Craigs list either. DARN i dont want to buy the cheap/stiff hose!
russau
 
Posts: 5924
Joined: Wed Jan 27, 2010 6:17 am
Location: St. Louis Missouri

Re: Too Old To Dredge?

Postby libertydave » Tue Mar 11, 2014 8:10 pm

Try looking for "Clearflow" or "Tigerflex" Group W. Hose is same or similar to that used by equipment manufacturers. Local supplier here in Seattle is Pacific Hose and Rubber. They sell the T-F "W" in 1" through 8" and cut to length. Bigger hoses cost more in freight.

At Liberty Resources we sold dozens of custom sized replacement hoses for high-banker combos and dredges and found that these hoses will last a long time.

LD
libertydave
 
Posts: 284
Joined: Thu Feb 18, 2010 11:09 am

Re: Too Old To Dredge?

Postby libertydave » Tue Mar 11, 2014 8:12 pm

Should also add to previous post that the "Group W" hose is clear or light smoke...and very flexible.

LD
libertydave
 
Posts: 284
Joined: Thu Feb 18, 2010 11:09 am

Re: Too Old To Dredge?

Postby russau » Wed Mar 12, 2014 3:14 am

Thanks Dave!
russau
 
Posts: 5924
Joined: Wed Jan 27, 2010 6:17 am
Location: St. Louis Missouri

Re: Too Old To Dredge?

Postby polekaat » Wed Mar 12, 2014 3:53 am

Russ,
I've bought from these guys here in Denver before. Their prices are great, i.e. 3" camlock gaskets were 25 cents each and camlock fittings were as cheap or cheaper than you can get on ebay.

Central States Hose, Inc. The hose and fittings superstore - hydraulic ...
http://www.centralstateshose.com/
Central States Hose distributes a complete selection of industrial and hydraulic
hose, couplings, hose assemblies and accessories....

5199 E 48th Ave, Denver, CO 80216

(800) 525-1182
polekaat
 
Posts: 182
Joined: Thu Feb 18, 2010 6:10 pm
Location: Ramah Colorado

Re: Too Old To Dredge?

Postby russau » Wed Mar 12, 2014 4:03 am

Thanks Trev, but im trying to (first) find it in the St.Louis,Mo. area to save on shipping! im sure its gotta be ava. close to me! shipping is a killer!
russau
 
Posts: 5924
Joined: Wed Jan 27, 2010 6:17 am
Location: St. Louis Missouri

PreviousNext

Return to General Prospecting

Who is online

Users browsing this forum: No registered users and 1 guest

cron