Hydrolic mining?

Any information related to prospecting

Moderators: russau, Leonard

Hydrolic mining?

Postby Geo-George » Fri Aug 27, 2010 4:07 pm

I know of the hydrolic mining of the past and that it was banned in Calif.
My question is,....
Is there any law against using water pressure from a 1 1/2" line to remove material from a sand/gravel bar that is located within a stream? The stream divides and goes around both sides of the bar. :?
I have done so much, with so little, for so long, that I am now qualified to do anything with nothing.
Now, I just have to find the time to put the dang thing together.
User avatar
Geo-George
 
Posts: 187
Joined: Mon Apr 12, 2010 5:51 am
Location: Reno, Nv.

Re: Hydrolic mining?

Postby Dawgmining » Fri Aug 27, 2010 5:58 pm

George`, :D your toilet is a hydralic devise, ask your ? to Reno Cris here.... http://www.nuggetshooter.ipbhost.com/

otherwise I have never been aressted for somthing I was not caught doing :?: :?: yous from Nevada so is Chris

Myself HANDS and PANS Below The water level

;) ;) ;) ;) ;) ;) ;) :lol: 8-)
John Adams
User avatar
Dawgmining
 
Posts: 82
Joined: Mon Feb 01, 2010 10:59 am
Location: Grants Pass OOr-gun

Re: Hydrolic mining?

Postby Geo-George » Fri Aug 27, 2010 8:35 pm

Never seen a toilet used to prospect for gold. :roll:
I'm from Nev., but my claim is in Calif.
I was hoping for a serious answer. :(
I have done so much, with so little, for so long, that I am now qualified to do anything with nothing.
Now, I just have to find the time to put the dang thing together.
User avatar
Geo-George
 
Posts: 187
Joined: Mon Apr 12, 2010 5:51 am
Location: Reno, Nv.

Re: Hydrolic mining?

Postby rivraton » Sat Aug 28, 2010 12:06 am

Geo-George wrote:Is there any law against using water pressure from a 1 1/2" line to remove material from a sand/gravel bar that is located within a stream? The stream divides and goes around both sides of the bar. :?

I'm not sure exactly where it is in the regs., but you are restricted to a 3/4" MAX hose diameter for washing / flushing.
User avatar
rivraton
 
Posts: 78
Joined: Tue Jan 26, 2010 1:15 pm
Location: California

Re: Hydrolic mining?

Postby Geo-George » Sat Aug 28, 2010 5:26 am

Thanks rivraton, I can do that.
I wasn't sure if it would still be concidered "high banking", but I believe I'm O.K. in that respect due to the fact that I will be working within the stream. ( below the high water line )
I have done so much, with so little, for so long, that I am now qualified to do anything with nothing.
Now, I just have to find the time to put the dang thing together.
User avatar
Geo-George
 
Posts: 187
Joined: Mon Apr 12, 2010 5:51 am
Location: Reno, Nv.

Re: Hydrolic mining?

Postby Hoser John » Sat Aug 28, 2010 5:37 am

There is NO size restriction and your absolutely right about BELOW the water line BUT just ask GO what happens when ya put dry into wet--plenty a trouble of that you can bet. BUT(gotta luv'm) like the man Dawg says-ifn' ya ain't seen ya ain't done squat and leave the panty twisting moralistic judgements to lesser men :twisted: party on and tons a au 2 u 2 -John
Hoser John
 
Posts: 3000
Joined: Wed Jan 27, 2010 6:42 am
Location: Redding Kalif

Re: Hydrolic mining?

Postby Geo-George » Sun Aug 29, 2010 6:58 am

Luckily, the sand and gravel are moist. Water is seeping under the bar in several places. The bar is lying on bedrock. I'm using the hose to wash material into a pile onto bedrock, shoveling into screens, then running through my sluice. Seems to be working just fine. Spent all of Sat. working the bar and am having good results. 8-)
I do wish I could legaly use a dredge though. :evil:
I have done so much, with so little, for so long, that I am now qualified to do anything with nothing.
Now, I just have to find the time to put the dang thing together.
User avatar
Geo-George
 
Posts: 187
Joined: Mon Apr 12, 2010 5:51 am
Location: Reno, Nv.

Re: Hydrolic mining?

Postby Seattle-times » Mon Aug 30, 2010 3:37 pm

You just need to have the right equipment:

http://video.yahoo.com/watch/4646256/12418751
Seattle-times
 
Posts: 3
Joined: Mon Aug 30, 2010 3:30 pm

Re: Hydrolic mining?

Postby Geo-George » Mon Aug 30, 2010 5:05 pm

That's a pretty cool unit, Calif would still concider it a "Suction Device" though. :(
I have done so much, with so little, for so long, that I am now qualified to do anything with nothing.
Now, I just have to find the time to put the dang thing together.
User avatar
Geo-George
 
Posts: 187
Joined: Mon Apr 12, 2010 5:51 am
Location: Reno, Nv.

Re: Hydrolic mining?

Postby Tanqd » Mon Aug 30, 2010 7:44 pm

Dredge smedge. That machine is a dryland cobble re-locator. You'd be fine!

Nice to hear from you Rex. Fired that thing up lately? Married yet?
Tanqd
 
Posts: 57
Joined: Fri Jan 29, 2010 10:15 am

Next

Return to General Prospecting

Who is online

Users browsing this forum: No registered users and 36 guests